Homag KAL 76/A20 Edgebander (USED, 1997)
Homag KAL 76/A20 Edgebander (USED, 1997)
Model: KAL 76/A20
SN: 0-200-08-2642
Year: 1997
480V; 60Hz; 3~
Stock#: N/A
Product Details
Edge Thickness edgebanding cap : 0.4 - 20 mm (3/4")., 70 mm min. panel width.
Equipped with: Magazine for up to 3 mm Coil stock, HPL & strip stock up to 20 mm; "Hot Melt" glue system with reversible glue roller applicator.
Pneumatically controlled pressure roll section with (7) total Pressure rollers.
Workstations: Double motor front & rear end trim, straight & chamfer trimming (.80 HP - 12,000 RPM ea. motor).
Top & bottom rough trim (2 HP - 12,000 RPM ea. motor).
Top & bottom fine trim, tiltable 0° - 50° manually (0.5 HP - 12,000 RPM ea. motor).
Four motor corner rounding station.
Profile scraping for PVC edges.
Last station: Top & bottom oscillating buffing unit (two 0.33 HP - 1,650 RPM motors).
Top pressure beam with double V-belts, 80 mm wide Heavy Duty feed chain with Auto-Lube
Feed speed up to 25 Meters per minute.
Complete with: SIKO Digital adjustments on work units, frequency converter, outrigger panel support, insulated sound cabins w/interior and overhead lighting for all trim workstations.
Homag KAL 76/A20 Edgebander (USED, 1997)
Model: KAL 76/A20
SN: 0-200-08-2642
Year: 1997
480V; 60Hz; 3~
Stock#: N/A
Product Details
Edge Thickness edgebanding cap : 0.4 - 20 mm (3/4")., 70 mm min. panel width.
Equipped with: Magazine for up to 3 mm Coil stock, HPL & strip stock up to 20 mm; "Hot Melt" glue system with reversible glue roller applicator.
Pneumatically controlled pressure roll section with (7) total Pressure rollers.
Workstations: Double motor front & rear end trim, straight & chamfer trimming (.80 HP - 12,000 RPM ea. motor).
Top & bottom rough trim (2 HP - 12,000 RPM ea. motor).
Top & bottom fine trim, tiltable 0° - 50° manually (0.5 HP - 12,000 RPM ea. motor).
Four motor corner rounding station.
Profile scraping for PVC edges.
Last station: Top & bottom oscillating buffing unit (two 0.33 HP - 1,650 RPM motors).
Top pressure beam with double V-belts, 80 mm wide Heavy Duty feed chain with Auto-Lube
Feed speed up to 25 Meters per minute.
Complete with: SIKO Digital adjustments on work units, frequency converter, outrigger panel support, insulated sound cabins w/interior and overhead lighting for all trim workstations.
Homag KAL 76/A20 Edgebander (USED, 1997)
Model: KAL 76/A20
SN: 0-200-08-2642
Year: 1997
480V; 60Hz; 3~
Stock#: N/A
Product Details
Edge Thickness edgebanding cap : 0.4 - 20 mm (3/4")., 70 mm min. panel width.
Equipped with: Magazine for up to 3 mm Coil stock, HPL & strip stock up to 20 mm; "Hot Melt" glue system with reversible glue roller applicator.
Pneumatically controlled pressure roll section with (7) total Pressure rollers.
Workstations: Double motor front & rear end trim, straight & chamfer trimming (.80 HP - 12,000 RPM ea. motor).
Top & bottom rough trim (2 HP - 12,000 RPM ea. motor).
Top & bottom fine trim, tiltable 0° - 50° manually (0.5 HP - 12,000 RPM ea. motor).
Four motor corner rounding station.
Profile scraping for PVC edges.
Last station: Top & bottom oscillating buffing unit (two 0.33 HP - 1,650 RPM motors).
Top pressure beam with double V-belts, 80 mm wide Heavy Duty feed chain with Auto-Lube
Feed speed up to 25 Meters per minute.
Complete with: SIKO Digital adjustments on work units, frequency converter, outrigger panel support, insulated sound cabins w/interior and overhead lighting for all trim workstations.
*This machine is offered in good running condition as taken from service and is subject to prior sale. Specifications are approximate and to the best of our knowledge. Verification is available upon request.
