Brandt KD-79-CF Corner Rounder Edgebander(USED, 2001)
Brandt KD-79-CF Corner Rounder Edgebander (USED, 2001)
Model: KD-79-CF
SN: 0-250-XXXX
Year: 2001
220/440V; 60Hz; 3~
Stock#: 1112-11
Product Details
* 0.4 mm to 8 mm (0.016" - 0.3125") Edgestrip thickness capacity
* 12mm – 50mm (1/2” - 2”) Panel thickness
* Automatic coil and strip feed magazine
* End trimming unit – (2) motors, 0.33 HP each, 12,000 RPM pneumatic indexing via program control, straight or chamfer up to 15°, mounted on precision THK ways
* Top & bottom fine trimming unit #1 – (2) trimming motors, 0. 5 HP, 12,000 RPM, tiltable from 0° to 15° with digital "quickset" system, pneumatic indexing via program control
* Top & bottom fine trimming unit #2 – (2) trimming motors, 0. 5 HP, 12,000 RPM, tiltable from 0° to 15° with digital "quickset" system, pneumatic indexing via program control
* Top & bottom contour trimming unit for corner rounding thick PVC, (2) trimming motors, 0.5 HP, 12,000 RPM
* Top & bottom scraping unit for finishing of roughly trimmed thick PVC edgings to remove the trimming marks, standard 3mm radius
* Buffing unit (top & bottom) - (2) motors, 2800 RPM
* Strengthened precutter for cutting PVC(max. 3 mm thick x 45 mm tall) from the coil
* PC-16 Program Control system for increased reliability and diagnostic assistance, no limit switches for setting operating units.
* Automatic height adjustment with top pressure beam for all work stations, equipped with digital height indicator
* Control panel located at machine infeed for operator convenience
* Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes
* Hot melt granulate glue application system with quick heat up time
* 36 Feet per minute feed speed
* Includes set of used tooling
Brandt KD-79-CF Corner Rounder Edgebander (USED, 2001)
Model: KD-79-CF
SN: 0-250-XXXX
Year: 2001
220/440V; 60Hz; 3~
Stock#: 1112-11
Product Details
* 0.4 mm to 8 mm (0.016" - 0.3125") Edgestrip thickness capacity
* 12mm – 50mm (1/2” - 2”) Panel thickness
* Automatic coil and strip feed magazine
* End trimming unit – (2) motors, 0.33 HP each, 12,000 RPM pneumatic indexing via program control, straight or chamfer up to 15°, mounted on precision THK ways
* Top & bottom fine trimming unit #1 – (2) trimming motors, 0. 5 HP, 12,000 RPM, tiltable from 0° to 15° with digital "quickset" system, pneumatic indexing via program control
* Top & bottom fine trimming unit #2 – (2) trimming motors, 0. 5 HP, 12,000 RPM, tiltable from 0° to 15° with digital "quickset" system, pneumatic indexing via program control
* Top & bottom contour trimming unit for corner rounding thick PVC, (2) trimming motors, 0.5 HP, 12,000 RPM
* Top & bottom scraping unit for finishing of roughly trimmed thick PVC edgings to remove the trimming marks, standard 3mm radius
* Buffing unit (top & bottom) - (2) motors, 2800 RPM
* Strengthened precutter for cutting PVC(max. 3 mm thick x 45 mm tall) from the coil
* PC-16 Program Control system for increased reliability and diagnostic assistance, no limit switches for setting operating units.
* Automatic height adjustment with top pressure beam for all work stations, equipped with digital height indicator
* Control panel located at machine infeed for operator convenience
* Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes
* Hot melt granulate glue application system with quick heat up time
* 36 Feet per minute feed speed
* Includes set of used tooling
Brandt KD-79-CF Corner Rounder Edgebander (USED, 2001)
Model: KD-79-CF
SN: 0-250-XXXX
Year: 2001
220/440V; 60Hz; 3~
Stock#: 1112-11
Product Details
* 0.4 mm to 8 mm (0.016" - 0.3125") Edgestrip thickness capacity
* 12mm – 50mm (1/2” - 2”) Panel thickness
* Automatic coil and strip feed magazine
* End trimming unit – (2) motors, 0.33 HP each, 12,000 RPM pneumatic indexing via program control, straight or chamfer up to 15°, mounted on precision THK ways
* Top & bottom fine trimming unit #1 – (2) trimming motors, 0. 5 HP, 12,000 RPM, tiltable from 0° to 15° with digital "quickset" system, pneumatic indexing via program control
* Top & bottom fine trimming unit #2 – (2) trimming motors, 0. 5 HP, 12,000 RPM, tiltable from 0° to 15° with digital "quickset" system, pneumatic indexing via program control
* Top & bottom contour trimming unit for corner rounding thick PVC, (2) trimming motors, 0.5 HP, 12,000 RPM
* Top & bottom scraping unit for finishing of roughly trimmed thick PVC edgings to remove the trimming marks, standard 3mm radius
* Buffing unit (top & bottom) - (2) motors, 2800 RPM
* Strengthened precutter for cutting PVC(max. 3 mm thick x 45 mm tall) from the coil
* PC-16 Program Control system for increased reliability and diagnostic assistance, no limit switches for setting operating units.
* Automatic height adjustment with top pressure beam for all work stations, equipped with digital height indicator
* Control panel located at machine infeed for operator convenience
* Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes
* Hot melt granulate glue application system with quick heat up time
* 36 Feet per minute feed speed
* Includes set of used tooling
*This machine is offered in good running condition as taken from service and is subject to prior sale. Specifications are approximate and to the best of our knowledge. Verification is available upon request.
