IMG_0015.jpg
IMG_0016.jpg
IMG_0017.jpg
IMG_0018.jpg
IMG_0019.jpg
IMG_0015.jpg
IMG_0016.jpg
IMG_0017.jpg
IMG_0018.jpg
IMG_0019.jpg

Timesavers 137 HD Wide Belt Sander (Used)

$0.00 $6,000.00
Sold Out

Used Single Head Wide Belt Sander - Timesavers Model 137-1HP75 with 37" wide capacity.

  • 8" thickness capacity

  • Combination head

  • 4" diameter 60/65 duro helical

  • Grooved rubber covered contact roll

  • 20 HP main motor with 37" x 75" abrasive belt

  • Manual raise and lower of feed belt

  • Thickness setup device

  • (4) screw jacks for table lifting

  • 1 HP variable speed feed 15 to 45 FPM

  • Infeed and outfeed spring loaded holddown shoes

  • Load meter

  • (1) 6" diameter dust outlet with dust requirements 1 000 CFM

  • Weighs approximately 2 800 lbs.

Note: There may be some variances in the above features.

Add To Cart

Used Single Head Wide Belt Sander - Timesavers Model 137-1HP75 with 37" wide capacity.

  • 8" thickness capacity

  • Combination head

  • 4" diameter 60/65 duro helical

  • Grooved rubber covered contact roll

  • 20 HP main motor with 37" x 75" abrasive belt

  • Manual raise and lower of feed belt

  • Thickness setup device

  • (4) screw jacks for table lifting

  • 1 HP variable speed feed 15 to 45 FPM

  • Infeed and outfeed spring loaded holddown shoes

  • Load meter

  • (1) 6" diameter dust outlet with dust requirements 1 000 CFM

  • Weighs approximately 2 800 lbs.

Note: There may be some variances in the above features.

Used Single Head Wide Belt Sander - Timesavers Model 137-1HP75 with 37" wide capacity.

  • 8" thickness capacity

  • Combination head

  • 4" diameter 60/65 duro helical

  • Grooved rubber covered contact roll

  • 20 HP main motor with 37" x 75" abrasive belt

  • Manual raise and lower of feed belt

  • Thickness setup device

  • (4) screw jacks for table lifting

  • 1 HP variable speed feed 15 to 45 FPM

  • Infeed and outfeed spring loaded holddown shoes

  • Load meter

  • (1) 6" diameter dust outlet with dust requirements 1 000 CFM

  • Weighs approximately 2 800 lbs.

Note: There may be some variances in the above features.

You Might Also Like

DMC Epic (USED, 1999)
$0.00
Sold Out
Homag S225-CHB 53" WBS 3 Heads Plus Cleaning (Used). Model: S225 CHB; SN: XX; Year: 2018. Replacement cost $145,000.00
$89,000.00
Sold Out
EMC Wide Belt Sander (Used) 208/230volts, 3 phase, ONE 15hp Motor...low amps
$17,500.00
Sold Out
Volpato LASM Stroke Sander 1980 (Used)
$0.00 $5,000.00
Sold Out
Heesemann 53Inch 4 Head RRRL Wide Belt Sander (Used)
$95,000.00