Ayen SKB-50 Boring Machine (USED, 1986)
Ayen SKB-50 Boring Machine (USED, 1986)
Model: SKB-50 Boring Machine
SN: N/A
Year: 1986
230V; 60Hz; 3~
Stock#: 1602-01
50-Spindles total in (2) swivel heads with (25) spindles each, drills vertically from top & horizontally from rear, drills at any angle between 0° - 90° with a positive stop at 45°.
50-Spindle swivel head assembly converts quickly into (2) 25-spindle heads for double line boring, 5-1/8" min. distance between heads when line boring.
3 HP - 3,450 RPM Gear box motor, 39" panel width cap. with a 30-1/4" drilling width.
Complete with: (2) 39" Fences with flip-stops, (3) pneumatic "quick set" hold-down clamps, quick fence setting gauge, foot pedal control for drilling cycle/head positioning, selection of drill bits and operators manual.
Replacement cost: $25,000.00, (approx.).
FOB: Hudson, NY
Ayen SKB-50 Boring Machine (USED, 1986)
Model: SKB-50 Boring Machine
SN: N/A
Year: 1986
230V; 60Hz; 3~
Stock#: 1602-01
50-Spindles total in (2) swivel heads with (25) spindles each, drills vertically from top & horizontally from rear, drills at any angle between 0° - 90° with a positive stop at 45°.
50-Spindle swivel head assembly converts quickly into (2) 25-spindle heads for double line boring, 5-1/8" min. distance between heads when line boring.
3 HP - 3,450 RPM Gear box motor, 39" panel width cap. with a 30-1/4" drilling width.
Complete with: (2) 39" Fences with flip-stops, (3) pneumatic "quick set" hold-down clamps, quick fence setting gauge, foot pedal control for drilling cycle/head positioning, selection of drill bits and operators manual.
Replacement cost: $25,000.00, (approx.).
FOB: Hudson, NY
Ayen SKB-50 Boring Machine (USED, 1986)
Model: SKB-50 Boring Machine
SN: N/A
Year: 1986
230V; 60Hz; 3~
Stock#: 1602-01
50-Spindles total in (2) swivel heads with (25) spindles each, drills vertically from top & horizontally from rear, drills at any angle between 0° - 90° with a positive stop at 45°.
50-Spindle swivel head assembly converts quickly into (2) 25-spindle heads for double line boring, 5-1/8" min. distance between heads when line boring.
3 HP - 3,450 RPM Gear box motor, 39" panel width cap. with a 30-1/4" drilling width.
Complete with: (2) 39" Fences with flip-stops, (3) pneumatic "quick set" hold-down clamps, quick fence setting gauge, foot pedal control for drilling cycle/head positioning, selection of drill bits and operators manual.
Replacement cost: $25,000.00, (approx.).
FOB: Hudson, NY
*This machine is offered in good running condition as taken from service and is subject to prior sale. Specifications are approximate and to the best of our knowledge. Verification is available upon request.
